3 A6V _h_en_Ĥ Indication and operating elements Each FC72 has an integrated operating unit. Application ranges The FC72 is ideal for smaller applications, e.g., for use in workshops or hotels.
Configuration The FXS722 Cerberus-Engineering-Tool allows the system to be customized. In the event of a power cut, the batteries provide emergency current. Automatic summer/winter time changeover 2 A6V _h_en_ģ Function elements Operating unit The following elements are available on the operating unit: CPU module and electronics Ethernet connection Slot for RS232 or RS85 module Space for 'Kaba' or 'Nordic' key switch Periphery board Connection terminals for the following elements are available on the periphery board: C-NET lines Remote transmission (alarm, fault) Horn output Configurable control inputs and outputs Monitored alarm and fault output Power supply Power supply unit 70 W, emergency power supply The power supply feeds the hardware and charges the batteries. Up to 2000 events can be retrieved from the event memory based on various criteria. Customer texts can be adapted directly on the operating unit of the control panel or with the Cerberus-Engineering-Tool software. All the detector lines are monitored for ground faults.
The control panel is custom-configured using the Cerberus-Engineering-Tool software. possible OH720 outputs FDCI22 FDCW2 input FDCIO22 FDCI723 FDM22x Mimic display FT200-A FDCIO222 FDM22 inputs input FDOOT27 FDM273 Radio detectors Function features The FC72 is a compact standalone fire control panel with integrated operating unit for processing signals from FD720 devices. 26 addresses HI720 OH720 stub line FDCL22 OP720 OP720 output Conventional horn line via FCI2009-A FDA22/ FDA2 2VDC ext. FDCI222 FDS22/ FDS229 FDCL22-Ex FDCIO223 Fire controls FT200/FT20 Floor repeater terminal/ Floor repeater display HI722 inputs DBS72 / DBS729 DBS720 2 in-/outputs optionally C-NET loop max.
#Siemens cerberus pro user manual serial#
1 FC72 Cerberus PRO Fire control panel FS720 series, IP6 Compact, pre-assembled, microprocessor-controlled standalone fire control panel with integrated operating unit for up to 26 addresses Detection and automatic reading in (auto-configuration) of all C-NET devices, ready for operation immediately Processes signals from Cerberus PRO FD720 detector series Integrated degraded mode function Fast Ethernet interface for remote control service Can be extended by adding key switches Slot for one RS232 or RS85 serial interface Emergency power supply for emergency operating time of up to 72 hours Floor repeater displays, floor repeater operating units, and alarm devices on detector line (C-NET) Flexible configuration of complex applications and controls Configuration data can be uploaded/downloaded via remote access Firmware for all processor-controlled control panel components can be updated A6V _h_en_ Control Products and SystemsĢ System overview FC72 Fire control panel Remote access Engineering Tool, Operating Tool FDM233-Ex Explosionhazard area OOH70-A9-Ex Detection line collective Siemens, TM Synova SynoLINE300 or SynoLINE600 RT- Alarm RT-Fault 2VDC ext.
0 kommentar(er)
